Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 108)

Configuring PPP Services

A-8

308639-14.00 Rev 00

Parameter: Remote IP Address

Path: Protocols > PPP > Interfaces

Default: 0.0.0.0

Options: Any valid IP address

Function: Specifies the IP address the peer router should use. This interface includes this

IP address in NCP negotiations.

Instructions: If you want to specify an IP address for the peer router, enter it here.

If this interface has been up and running, you must also set the IP Enable

parameter to Disable, apply the change, and then reset the IP Enable parameter

to Enable to implement your changes.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.22

Parameter: IPX Network Number

Path: Protocols > PPP > Interfaces

Default: None

Options: Any valid, unique, unreserved network number. This number must be a string of

up to eight hexadecimal characters. (0xffffffff is invalid.)

Function: Specifies a network number used to negotiate the link. The negotiated number

must be unique. It cannot be a previously assigned network number.

Instructions: Enter a valid IPX network number for this PPP interface.

The network number does not have to be the same on both sides of the link; PPP

negotiates the higher of the two numbers. Note also that the negotiated IPX

network number may be 0 on both sides of the link. In this case, IPX defines the

link’s network number.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.24

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 108