Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 15)

308639-14.00 Rev 00

Preface

This guide describes the point-to-point protocol (PPP) and what you do to start

and customize PPP services on a Nortel Networks

™

router.

You can use the Bay Command Console (BCC

™

) or Site Manager to configure

PPP services on a router. In this guide, you will find instructions for using both the

BCC and Site Manager.

Before You Begin

Before using this guide, you must complete the following procedures. For a new

router:

• Install the router (see the installation guide that came with your router).

• Connect the router to the network and create a pilot configuration file (see

Quick-Starting Routers, Configuring BayStack Remote Access, or Connecting

ASN Routers to a Network).

Make sure that you are running the latest version of Nortel Networks BayRS

™

and

Site Manager software. For information about upgrading BayRS and Site

Manager, see the upgrading guide for your version of BayRS.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 15