Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 25)

Starting PPP Services

308639-14.00 Rev 00

1-5

Disabling and Reenabling PPP Services

After changing certain PPP line parameters, you must force renegotiation of the

link. To do this, you first disable, then reenable PPP on the link. Disabling the link

also stops the flow of traffic from routing over the PPP interface, even though the

upper-layer protocol may still be enabled.

Using the BCC

In BCC configuration mode, navigate to the PPP prompt for the interface and

enter:

state disable

Then reenable PPP on the interface by entering:

state enable

For example, the following commands force renegotiation of the link by disabling,

then reenabling PPP routing on the interface slot 3, circuit 1.

ppp/3/1# state disable

ppp/3/1# state enable

Using Site Manager

To force link renegotiation for this PPP interface, do the tasks in the following

table.

Site Manager Procedure

You do this System responds

1. From the Protocols menu, choose

PPP

. The Interfaces menu appears.

2. Choose

Interfaces

. The Interfaces window opens.

3. Choose

Lines

. The Lines window opens.

4. Set

Enable (LCP)

Disable

(See page A-14.)

5. Click on

. The Interfaces window opens.

6. Set

Enable (LCP)

Enable

. (See

page A-14.)

7. Click on

. The Interfaces window appears.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Avaya Configuring PPP Services