Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 113)

PPP Parameters

308639-14.00 Rev 00

A-13

PPP Line Parameter Descriptions

Use the following guidelines to configure the PPP Lines parameters. The order of

presentation corresponds to the order of fields in the PPP Line Lists window, and

also (approximately) to the order of items in the wfPppLineEntry MIB. Figure A-2

shows the Site Manager PPP Line Lists window. In the path names that follow,

bold text indicates that in Site Manager, you invoke the PPP Line Lists window by

clicking on the Lines button on the PPP Interface Lists window.

Parameter: Fragmentation Trigger Size

Path: Protocols > PPP > Interfaces

Default: 256 (bytes)

Range: 64 through the maximum transmission unit for the circuit

Function: This parameter is active only for multilink. Specifies the minimum size of a

packet that multilink will fragment.

Instructions: When packet fragmentation over multilink is permitted, accept the default or

specify the minimum packet size that PPP will consider fragmenting.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.57

1 2 ... 108 109 110 111 112 113 114 115 116 117 118 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 113