Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 118)

Configuring PPP Services

A-18

308639-14.00 Rev 00

Parameter: Local Authentication Protocol

Path: Protocols > PPP > Interfaces > Lines

Default: CHAP for dial services

None for all others

Options: None

PAPAUTH

CHAP

Function: Specifies the type of authentication protocol that this interface uses: none, PAP

(Password Authentication Protocol), or CHAP (Challenge Handshake

Authentication Protocol).

Instructions: If you do not want to enable security features on this interface, accept the

default, None.

To enable Password Authentication Protocol, select PAPAUTH. Then do the

following:

• Define the Local PAP ID and Local PAP Password parameters for this

interface.

• Set the Enable (LCP) parameter to Disable, apply the change, and then reset

the parameter to Enable.

To enable Challenge Handshake Authentication Protocol, select CHAP. Then do

the following:

• Define the CHAP Secret, CHAP Local Name, and CHAP Periodic Timer

parameters for this interface. Find these parameters by scrolling further

through the list of line parameters.

• Set the Enable (LCP) parameter to Disable, apply the change, and then reset

the parameter to Enable.

For all dial services, you must use PAP or CHAP, either of which provides an

identification mechanism that is essential to bring up demand, backup, and

bandwidth lines. You must configure CHAP Local Name, CHAP Secret, PAP

ID, and PAP Password through the Dial menu. See Configuring Dial Services

for details.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.15

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 118