Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 129)

308639-14.00 Rev 00

B-1

Appendix B

Default PPP Configuration

The PPP default configuration depends on which protocols you enable for the

interface. Table B-1

and Table B-2 list the default PPP parameter settings.

Table B-1. PPP Interface Parameters

Parameter Default

IP Enable

OSI Enable

XNS Enable

DECnet IV Enable

AppleTalk Enable

IPX Enable

Bridge Enable

VINES Enable

Enabling support for any of these protocols when

you configure PPP on this interface automatically

sets the protocol’s corresponding Enable

parameter to Enable. Otherwise, the default is

Disable.

CCP Enable If you enabled data compression on this interface,

Site Manager automatically sets this parameter to

Enable. Otherwise, the default is Disable.

Remote IP Address 0.0.0.0

IPX Network Number None

IPX Remote Node Number None

Remote AppleTalk Node None

AppleTalk Routing Protocol RTMP

Bridge Ethernet Enable

Bridge FDDI Enable

Bridge Token Ring Enable

(continued)

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 129