Avaya Configuring PPP Services Bedienungsanleitung Seite 128

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 152
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 127
Configuring PPP Services
A-28
308639-14.00 Rev 00
Parameter: MRU Size (bytes)
Path: Protocols > PPP > Interfaces > Lines
Default: 1590 (leased lines)
|
1500 (dial lines)
Options: 1 to 4600
Function: Sets the maximum receive unit (MRU) size, in bytes, for the line.
Instructions: The router determines the MRU size based on the value of the RFC1661
Compliance parameter and whether the connection is a leased line or a dial line.
For leased lines, set the RFC1661 Compliance parameter to Disable. The router
will then negotiate the MRU size automatically; there is no need to manually
configure the MRU size.
For dial lines, accept the default value for the RFC1661 Compliance parameter
(Enable). With RFC1661 Compliance enabled, you can manually configure the
MRU size. In most cases, you should accept the default value, 1500 bytes.
However, if you configure an MRU size other than the default, be aware that the
router can negotiate only for an MRU value that is larger than its configured
value. The range that it can negotiate is between the configured MTU size and
the router driver MTU value, minus the PPP header and CRC size. For example,
if the configured MTU is 1500 and the driver MTU is 1600, the negotiation
range is 1500 to 1590 (1600 - 8 - 2 = 1590). We recommend that the peer be
configured for an MRU value of at least 1500 bytes. Note also that the router
and its peer do not have to use the same MRU value to communicate with one
another.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.48
Parameter: RFC1661 Compliance
Path: Protocols > PPP > Interfaces > Lines
Default: Enable
Options: Enable
|
Disable
Function: Enables RFC 1661 compliance for a PPP dial circuit. RFC 1661 defines the
standards for PPP operation.
Instructions: Accept the default, Enable, to make the PPP dial circuit RFC 1661-compliant.
For PPP leased lines, select Disable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.49
Seitenansicht 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 151 152

Kommentare zu diesen Handbüchern

Keine Kommentare