Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 115)

PPP Parameters

308639-14.00 Rev 00

A-15

Parameter: Restart Timer in Seconds

Path: Protocols > PPP > Interfaces > Lines

Default: 3 (seconds)

Range: 1 through 100

Function: Specifies the number of seconds that the restart timer waits before retransmitting

data.

Instructions: Accept the default value of 3.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.7

Parameter: Seconds between Xmit of Echo-Request

Path: Protocols > PPP > Interfaces > Lines

Default: 0 (seconds)

Range: 0 through 100

Function: Specifies the number of seconds that the router waits between the transmission

of echo-request packets. A value of 0 means that this parameter is turned off.

Instructions: Accept the default value of 0 or enter an integer value in the range 0 through

100.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.8

Parameter: Echo-Reply Acceptable Loss

Path: Protocols > PPP > Interfaces > Lines

Default: 3 (packets)

Range: 1 through 100

Function: Specifies the maximum number of unacknowledged echo-reply packets that the

router will transmit before declaring the point-to-point link down.

Instructions: Accept the default value of 3.

If you enter a different value, you must set the Enable (LCP) parameter to

Disable, apply the change, and then reset the parameter to Enable to implement

your change.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.9

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 115