Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 125)

PPP Parameters

308639-14.00 Rev 00

A-25

Parameter: CHAP Periodic Timer

Path: Protocols > PPP > Interfaces > Lines

Default: 0 (disabled)

Options: Any number of seconds. Setting this value to 0 disables the timer. A reasonable

value for this parameter is 60.

Function: Allows for repeated authentication challenges at an interval (in seconds) that

either peer on the link can specify. The timer begins counting when an

authentication phase has completed. A new challenge does not begin until the

amount of time you specify elapses.

Instructions: Accept the default or set this parameter to 60.

If you have not configured CHAP, ignore this field.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.35

Parameter: Allow PAP Reject

Path: Protocols > PPP > Interfaces > Lines

Default: Disable

Options: Enable

Disable

Function: Some peers do not use PAP. If you set this parameter to Enable, your router

accepts the reject message from such a peer and removes PAP from the LCP

configure-request.

Instructions: Select Enable or Disable.

If you have not configured PAP, ignore this field.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.39

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 125