Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 93)

Customizing PPP

308639-14.00 Rev 00

3-39

Disabling Loopback Checking

For test purposes, you can disable the loopback test that the peer normally

performs as part of its network integrity checking. The loopback test ensures that a

peer is talking to the network, not to itself.

To disable loopback detection, set the Magic Num Disable parameter to Disable.

After disabling this parameter, you must explicitly set it to Enable to re-enable

loopback checking.

Using the BCC

Navigate to the line prompt for the circuit and enter

magic-number

value

enable

disable

For example, the following command disables loopback checking on the interface

3/1.

line/3/1# magic-number disable

4. Set

Async Control Character Map

(See page A-26.)

5. If you have no other PPP line parameters

to configure, click on

. Otherwise,

continue with the Lines configuration.

The Interfaces window opens.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 93