Avaya Configuring PPP Services Bedienungsanleitung PDF herunterladen (Seite 89)

Customizing PPP

308639-14.00 Rev 00

3-35

The default value for this parameter is 90 (percent). You can specify values in the

range 1 through 100 (percent).

Using the BCC

Enable link quality monitoring.

Enabling link quality monitoring on the interface allows all the other link

quality monitoring parameters to function. Navigate to the IP prompt and

enter the following command.

link-quality-protocol

value

none

LINKQR

Enable the peer LQR timer.

To specify whether the remote peer should maintain the LQR timer for the

interface, enter the following command after setting the link quality protocol

to LINKQR.

peer-lqr-timer

value

enable

disable

Set the LQR reporting period.

To specify the LQR reporting period, enter the following command.

lqr-reporting-period

seconds

is an integer in the range 1 through 120.

Note:

A summary example, showing the use of all the BCC link monitoring

commands, follows these syntax descriptions.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 151 152

Keine Kommentare

Avaya Configuring PPP Services Bedienungsanleitung Seite 89