Avaya R2 Betriebsanweisung PDF herunterladen (Seite 77)

Configuring BCMS Vu from the Server 4-13

Configuring and Managing the BCMS Vu Software

Chapter 4

Panel/Network from Windows. On the Identification tab, the machine name is

in the “Computer Name” field.

6. From the “Model of wallboard” pull-down menu, select the model name of the

wallboard.

7. In the “Address” box, enter the address of the wallboard. This is a number from

zero to 127. Refer to the wallboard user guide to find out how to specify the

wallboard address.

8. Select Next.

The “Specify the Serial Port...” window appears.

9. From the pull-down menu, select the name of the port on the PC to which the

wallboard is connected.

10. Select Next.

A window appears that allows you to test whether the wallboard is properly

registered and physically connected to a PC.

11. Click on the “Test Connection” button.

Note

You address Avaya wallboards using the remote control unit that

comes with the wallboard. Refer to the user’s guide that comes

with the wallboard.

You address a Avaya wallboard using hexadecimal notation.

However, when you enter a wallboard address in the BCMS Vu

configuration procedure, you must use decimal notation.

Furthermore, BCMS Vu accepts wallboard addresses only from 0 to

127 (decimal).

For a table that translates hexadecimal addresses into decimal

addresses, refer to “Installing the Wallboard” in Chapter 5 of

BCMS Vu Software R2 Installation Guide.

Note

Only COM Port numbers from 1 through 8 are allowed.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 267 268

Keine Kommentare

Avaya R2 Betriebsanweisung Seite 77