Avaya Configuring PPP Services Bedienungsanleitung Seite 106

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 140
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 105
Configuring PPP Services
A-8 117360-A Rev. A
Parameter: Remote IP Address
Path: Protocols > PPP > Interfaces
Default: 0.0.0.0
Options: Any valid IP address
Function: Specifies the IP address the peer router should use. This interface includes this
IP address in NCP negotiations.
Instructions: If you want to specify an IP address for the peer router, enter it here.
If this interface has been up and running, you must also set the IP Enable
parameter to Disable, apply the change, and then reset the IP Enable parameter
to Enable to implement your changes.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.22
Parameter: IPX Network Number
Path: Protocols > PPP > Interfaces
Default: None
Options: Any valid, unique, unreserved network number. This number must be a string of
up to eight hexadecimal characters. (0xffffffff is invalid.)
Function: Specifies a network number used to negotiate the link. The negotiated number
must be unique. It cannot be a previously assigned network number.
Instructions: Enter a valid IPX network number for this PPP interface.
The network number does not have to be the same on both sides of the link; PPP
negotiates the higher of the two numbers. Note also that the negotiated IPX
network number may be 0 on both sides of the link. In this case, IPX defines the
link’s network number.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.2.1.24
Seitenansicht 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare