
117360-A Rev. A
xiii
About This Guide
If you are responsible for configuring PPP on a Bay Networks
®
router, you need to
read this guide.
You can now use the Bay Command Console (BCC™) to configure this protocol
on a router. In this guide, you will find instructions for using both the BCC and
Site Manager. If you choose to accept all the default parameters to start PPP on the
router, you can use either BCC or Site Manager. If you choose to configure
individual parameters, however, you will find that several parameters are not yet
configurable with the BCC. In these cases, you must use Site Manager.
Before You Begin
Before using this guide, you must complete the following procedures.
For a new router:
• Install the router (refer to the installation manual that came with your router).
If you want to Go to
Start PPP on a router and get it running with default settings for
parameters
Chapter
1
Learn about the PPP protocol and special aspects of the Bay
Networks implementation of PPP
Chapter 2
Change default settings for PPP parameters Chapter 3
Obtain information about Site Manager parameters (this is the same
information you obtain using Site Manager online Help)
Appendix A
View the PPP default configuration Appendix B
View the list of PPP statistics obtainable from the Site Manager
Statistics Manager or from the Technician Interface
Appendix C
Kommentare zu diesen Handbüchern