
Configuring PPP Services
3-14 117360-A Rev. A
Using the BCC
Navigate to the IP prompt and enter
state disable
For example, the following command disables IP routing on the interface with the
IP address of 1.1.1.1.
ip/1.1.1.1# state disable
Using Site Manager
To stop traffic from routing over this PPP interface, do the tasks in the following
table.
Customizing PPP Lines
The PPP line parameters specify the characteristics of individual lines within the
interface. You can edit the default PPP line parameter values to fit your particular
system requirements. Appendix B lists the default PPP line parameter values. The
following sections describe how to customize those parameters.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Set IP Enable to Disable. (See page A-3.)
4. If you have no other Interface parameters
to configure, click on OK. Otherwise,
continue with the Interface configuration.
The Configuration Manager window
appears.
Kommentare zu diesen Handbüchern