
Configuring PPP Services
A-16 117360-A Rev. A
Parameter: Max Configure-Requests
Path: Protocols > PPP > Interfaces > Lines
Default: 10 (packets)
Range: 1 through 100000
Function: Specifies the maximum number of unacknowledged configure-request packets
that the router will transmit before assuming that the peer router on the other
end of the link is unable to respond. The link is then brought down. Valid
acknowledgments include configure-ACK, configure-NAK, or configure-reject
packets.
Instructions: Accept the default value of 10.
If you enter a different value, you must set the Enable (LCP) parameter to
Disable, apply the change, and then reset the parameter to Enable to implement
your change.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.10
Parameter:
Max Terminate-Requests
Path: Protocols > PPP > Interfaces > Lines
Default: 2 (packets)
Range: 1 through 100
Function: Specifies the maximum number of unacknowledged terminate-request packets
that the router transmits before assuming that the peer router on the other end of
the link is unable to respond. The valid acknowledgment is a terminate-ACK
packet.
Instructions: Accept the default value of 2.
If you enter a different value, you must set the Enable (LCP) parameter to
Disable, apply the change, and then reset the parameter to Enable to implement
your change.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.11
Kommentare zu diesen Handbüchern