Avaya Configuring PPP Services Bedienungsanleitung Seite 64

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 140
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 63
Configuring PPP Services
3-10 117360-A Rev. A
Enabling Data Compression on This Interface
If you enabled data compression when you initially configured this interface, then
data compression is configured by default for PPP; otherwise, the default is
Disable. To stop compression over this interface, set this parameter to Disable.
This parameter allows or stops data compression. It does not enable or disable
data compression for the interface, but disabling the Compression Control
Protocol (CCP) stops data compression over this interface.
To enable or disable data compression on this interface, do the tasks in the
following table.
Enabling IPV6 on This Interface
If you enabled Internet Protocol, version 6 (IPv6) support when you initially
configured this interface, then the IPV6 parameter is enabled by default for PPP;
otherwise, the default is Disable. To stop IPv6 traffic from being routed over this
interface, set this parameter to Disable.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Set CCP Enable. (See page A-7.)
4. If you have no other Interface parameters
to configure, click on OK. Otherwise,
continue with the Interface configuration.
The Configuration Manager window
appears.
Seitenansicht 63
1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare