Avaya Configuring PPP Services Bedienungsanleitung Seite 62

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 140
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 61
Configuring PPP Services
3-8 117360-A Rev. A
With the bridging feature enabled, you can then enable or disable bridging for
particular encapsulation types. For example, if you want PPP to accept and
forward Ethernet-encapsulated bridged traffic, set the Bridge Ethernet parameter
to Enable (the default).
To enable or disable bridging on this interface, do the tasks in the following table.
Enabling VINES Support on This Interface
If you enabled VINES support when you first configured PPP on this interface,
this parameter defaults to Enable; otherwise, the default is Disable. To stop
VINES traffic from being routed over this interface, set this parameter to Disable.
This parameter enables or disables the network control protocol for VINES. It
does not enable or disable VINES routing services for the interface. However,
disabling the network control protocol for VINES stops VINES traffic from being
routed over this interface.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Set Bridge Enable. (See page A-6.)
4. Enable or disable the encapsulation mode
for the type of traffic bridged on this
interface.
Set Bridge Ethernet (See page A-10.)
Set Bridge FDDI. (See page A-11.)
Set Bridge Token Ring. (See page A-11.)
5. If you have no other Interface parameters
to configure, click on OK. Otherwise,
continue with the Interface configuration.
The Configuration Manager window
appears.
Seitenansicht 61
1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare