Avaya Configuring PPP Services Bedienungsanleitung Seite 61

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 140
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 60
Customizing PPP
117360-A Rev. A 3-7
To specify an AppleTalk Node Number and the AppleTalk Routing Protocol, do
the tasks in the following table.
Enabling Bridging on an Interface
When bridging is enabled for an interface, PPP accepts bridged traffic in the
specified encapsulation and forwards it over the PPP network. Site Manager lets
you enable or disable bridging for Ethernet, FDDI, and/or token ring encapsulated
packets. By default, all these parameters are enabled. If you change any of these
parameters dynamically (that is, for a router that has already completed its
negotiations), you must force LCP renegotiation on the interface, as previously
described.
Before you can enable a particular type of encapsulated bridged traffic, you must
enable bridging on the interface. You do this by default if you enabled bridging
when you initially set up the PPP interface, but you can disable or re-enable it
here. To stop traffic from being bridged over this interface, set this parameter to
Disable.
The Bridge Enable parameter enables or disables the network control protocol for
the bridge. It does not enable or disable bridging services for the interface.
However, disabling the network control protocol for the bridge stops traffic from
being bridged over this interface.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Set the Remote AppleTalk Node.
(See page A-9.)
4. Set the AppleTalk Routing Protocol.
(See page A-10.)
5. If you have no other Interface parameters
to configure, click on OK. Otherwise,
continue with the Interface configuration.
The Configuration Manager window
appears.
Seitenansicht 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare