Avaya Configuring PPP Services Bedienungsanleitung Seite 86

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 140
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 85
Configuring PPP Services
3-32 117360-A Rev. A
Configuring PPP Interoperability with CLAM
If you configure a CHAP local name on a Bay Networks router that connects to a
Corporate LAN Access Module (CLAM™) router, that local name is used to
negotiate the link. If you do not configure a CHAP Local Name, Site Manager
uses BAYNETWORKS as a default CHAP local name.
Using the BCC
The BCC does not allow you to configure these parameters.
Using Site Manager
To specify a CHAP secret, CHAP local name, CHAP authentication challenge
interval, and enable PAP fallback for this interface, do the tasks in the following
table.
Setting Up Link Quality Monitoring
When you turn on the link quality monitoring and reporting function for an
interface, PPP monitors the quality of the point-to-point link as a percentage of
sent packets received on each end of the link. When the average quality falls
below the threshold you specify, PPP brings down the link. The driver software
automatically brings the link back up and renegotiates the connection.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Choose Lines. The Lines window opens.
4. Set CHAP Secret. (See page A-24.)
5. Set CHAP Local Name. (See page A-24.)
6. Set CHAP Periodic Timer.
(See page A-25.)
7. Set Enable PAP Fallback.
(See page A-21.)
8. If you have no other PPP line parameters
to configure, click on OK. Otherwise,
continue with the Lines configuration.
The Interfaces window opens.
Seitenansicht 85
1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare