Avaya Configuring PPP Services Bedienungsanleitung Seite 119

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 140
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 118
PPP Parameters
117360-A Rev. A A-21
Parameter: Enable PAP Fallback
Path: Protocols > PPP > Interfaces > Lines
Default: Disable
Options: Enable
| Disable
Function: Enabling this parameter causes a fallback to PAP if you have selected CHAP as
the authentication protocol, and an attempt to negotiate CHAP fails.
Instructions: Select Enable or Disable. Set this parameter to Enable if you mix authentication
types in a pool. Remember that you must use an authentication protocol if you
are using dial-on-demand, bandwidth-on-demand, or dial backup.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.32
Parameter: Link Quality Protocol
Path: Protocols > PPP > Interfaces > Lines
Default: None
Options: None
| LINKQR
Function: Enables or disables the Link Quality Protocol for this interface.
Instructions: To enable link quality reporting, set this parameter to LINKQR. When you
enable link quality reporting on one side of the connection, the router on which
you enable it is responsible for monitoring link quality for the connection. To
implement your changes, set the Enable (LCP) parameter to Disable, apply the
change, and then reset the parameter to Enable.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.2.1.1.21
Seitenansicht 118
1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 139 140

Kommentare zu diesen Handbüchern

Keine Kommentare