
Configuring PPP Services
3-36 117360-A Rev. A
5. Set the outbound link quality.
To specify the outbound link quality, enter the following command after
setting the link quality protocol to LINKQR.
lqr-percentage-sent
percent
percent
is an integer in the range 0 through 100.
Summary Example for BCC Link Monitoring Commands
This example shows, for the PPP line on slot 3, circuit 1, how to use BCC to
• Enable link quality monitoring.
• Specify that the remote peer should maintain the LQR timer.
• Specify an LQR reporting period of 5 seconds.
• Set the acceptable inbound success rate to 85.
• Set the acceptable outbound success rate to 85.
line/3/1# link-quality-protocol LINKQR
line/3/1# peer-lqr-timer enable
line/3/1# lqr-reporting-period 5
line/3/1# lqr-percentage-received 85
line/3/1# lqr-percentage-sent 85
Kommentare zu diesen Handbüchern