Avaya BCM50 Konfigurationsanleitung PDF herunterladen (Seite 208)

100

101

208 Chapter 22 Configuring CLID on your system

NN40020-603NN40020-603

3 In order for the telephone to display the name, it must have Caller ID set for the line assigned

to the telephone. Refer to “Line Access - Line Assignment tab” in the Device Configuration

Guide (NN40020-300).

4 Set First display to Name. Refer to “Capabilities and Preferences main tab” in the Device

Configuration Guide (NN40020-300).

Programming line name display (incoming)

Answered calls can display the name, incoming number, and line name/number for calls coming in

over lines that allow full CLID.

Lines are named by their number as a default. However, you can provide a more descriptive

identifier. The Name field is located on the main table under Configuration > Telephony > Lines

(“Trunk/Line Data, main panel” in the Device Configuration Guide (NN40020-300)).

On the Hunt group record (Configuration > Telephony > Hunt Groups > Hunt Groups table),

you can change the Hunt group Name field from the Hunt group DN to a more logical label for the

group. Note that only eight characters display. Refer to “Hunt Groups system setup” in the Device

Configuration Guide (NN40020-300).

Programming outgoing CLID

Telephones can transmit a business name, telephone name and number (outgoing line identifier)

for outgoing calls over trunks to switches that support outgoing name and number (ONN) display,

or between telephones within the system. This following describes the different areas where these

capabilities are configured.

Programming Business name display (outgoing)

Nortel recommends that you use a blank space for the last character of the Business name to act as

a separator between the Business name and telephone name.

Note that if you leave this field blank, no name appears.

To program the Business Name, select Configuration > Telephony > Global Settings > Feature

Settings.

To program the Business Name

1 Click the field beside Business Name.

2 Type a maximum of eight characters for a name.

Leave a blank space for the last character of the Business name to act as a separator between

the Business name and telephone name.

3 Other areas that you must program include:

1 2 ... 203 204 205 206 207 208 209 210 211 212 213 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM50 Konfigurationsanleitung Seite 208

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya BCM50