Avaya BCM50 Konfigurationsanleitung PDF herunterladen (Seite 524)

100

101

524 Chapter 70 Dial Up Interfaces panel

NN40020-603NN40020-603

Create a dial-up interface

1 Click Configuration > Resources > Dial Up Interfaces.

2 Click Add.

The Add Interface dialog box appears.

3 Select Modem from the drop-down menu.

4 Enter a logical name for the interface in the interface name field.

5 Click OK.

6 Select the new Modem interface.

7 Click the Link Parameters tab in the bottom panel.

8 Enter the Dial-out number to use for the back-up.

9 Click the Access Parameters tab in the bottom panel.

10 Select the account with remote access privileges from the Dial-out user name drop-down

menu.

11 Select the Authentication value that is appropriate for your configuration. See Table 127 for a

description of these fields.

Add the SNMP Trap destination

1 Click Configuration > Administrator Access > SNMP > SNMP Trap Destinations tab.

2 Click Add.

The Add Trap Destination dialog box appears.

3 See the Administration Guide (NN40020-600) for information on how to configure the Add

Trap Destination dialog box.

4 Click OK.

Static Routes for Automatic Dial-out Interfaces

Static routes must be configured for Automatic Dial-out Interfaces. These can be programmed in

Element Manager:

Configuration > System > IP Subsystem > Dial-Out Static Routes

Refer to “Configuring static routes” on page 463

Note: The Host address must be the IP address of the static route created in

this procedure.

1 2 ... 519 520 521 522 523 524 525 526 527 528 529 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM50 Konfigurationsanleitung Seite 524

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya BCM50