Avaya BCM50 Konfigurationsanleitung PDF herunterladen (Seite 517)

100

101

Chapter 70 Dial Up Interfaces panel 517

Networking Configuration Guide

Additional configuration to allow network access functionality

If the BCM50 has an integrated router (BCM50a or BCM50e), then you must:

• Configure a static route on the integrated router.

• Configure the firewall on the integrated router to Bypass Triangle Route.

For example, consider the network configuration shown in Figure 144.

Figure 144 Typical dial-in configuration

Auto-disable timer <0-30

minutes>

Time after which the Dial-in for the modem is disabled after

use.

Default: 0

Directory Number <read-only> Read-only number assigned to the analog modem. Used for

manual transfer of call or by auto-attendant.

Local IP Address Specification

Remote assigned <check box> If selected, the BCM obtains its IP address from the remote

end.

Default: disabled

IP Address <IP Address> Use this IP Address as the local IP address for the PPP

connection. This value is used when “Remote assigned” is

disabled.

Default: 10.10.14.1

Remote IP Address Specification

Assign IP address to

remote

<check box> If selected, the BCM will assign the IP address specified in the

IP Address field of this section to the remote end of the

connection.

Default: selected

IP Address <IP Address> When the Assign IP address to remote is enabled BCM will

assign to the remote end of the connection the IP address

specified in this field.

Default: 10.10.14.2

Table 116 Modem Dial-In Parameters fields (Sheet 3 of 3)

Attribute Value Description

BCM50a/e

DIALIN_PC

Customer LAN

CSC: 192.168.1.2

Router: 192.168.1.1

(10.10.14.2)

PC1

(192.168.1.50)

1 2 ... 512 513 514 515 516 517 518 519 520 521 522 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM50 Konfigurationsanleitung Seite 517

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya BCM50