Avaya BCM50 Konfigurationsanleitung PDF herunterladen (Seite 520)

100

101

520 Chapter 70 Dial Up Interfaces panel

NN40020-603NN40020-603

Connection State: This is a table that shows the current dial-in state if connected.

Note: There is a maximum of two entries in this table (as there are two ISDN channels). This table will

display the ISDN channels that are available for ISDN dial in. If any channels are being used for ISDN

dial-out (either Automatic or manual) then this channel will not be available for ISDN dial-in, and will not

appear in this table.

Channel <read-only> The ISDN channel used.

User <read-only> Displays the user that is currently dialed in.

Local IP Address <read-only> Displays the local IP address assigned to the dial-in connection.

Remote IP Address <read-only> Displays the remote IP address of the dial-in connection.

Callback <read-only>

Displays if callback is enabled for this dial-in connection.

Status <read-only>

The status of the dial-in connection.

ISDN Callback Settings

Callback retries <1-10>

The number of attempts made by the BCM to dial-out to the

remote end during callback.

Default: 3

Callback retry

interval (s)

<0-360>

Interval for successive connection attempts for dial-out during

callback.

Default: 60 seconds

PPP Configuration. These parameters are passed to PPP stack to manage the PPP connection.

Idle timeout (s) <numeric

string>

Idle time period after which PPP will terminate the PPP

connection.

Default: 1800 seconds

Maximum receive unit <128-1500> The maximum size of the packets that can be received.

Default: 500

Maximum Transmit Unit <128-1500> The maximum size of the packets that will be sent.

Default: 500

Authentication support PAP

CHAP

Supported PPP authentication.

Default: CHAP

Dial-In Settings

Assigned Lines Assign target lines for ISDN dial-in.

Local IP Address Specification

Remote assigned <check box> When selected, BCM obtains its IP address from the remote

end.

Cleared, the BCM will use the addresses specified below for the

first and second dial-in connections.

Default: disabled

First dial-in IP Address <IP Address> The IP address that will be assigned to the BCM side of the first

dial-in connection. This is only assigned if the Remote

Assigned is disabled.

Default: 10.10.18.1

Table 118 ISDN Dial-In Parameters fields (Sheet 2 of 3)

Attribute Value Description

1 2 ... 515 516 517 518 519 520 521 522 523 524 525 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM50 Konfigurationsanleitung Seite 520

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya BCM50