Avaya BCM50 Konfigurationsanleitung PDF herunterladen (Seite 303)

100

101

Chapter 32 Private networking: MCDN over PRI and VoIP 303

Networking Configuration Guide

MCDN networking checklist

The following points provide a quick check for the system prerequisite settings for MCDN

networking.

Select the dialing plan to be used:

• UDP (Universal Dialing Plan)

— DNs on the same node are dialed directly.

— DNs on other nodes are called by first dialing an Access Code and an ESN.

— Each node has its own ESN.

• CDP (Coordinated Dialing Plan)

— DNs on all nodes are dialed directly.

Ensure the following common programming is configured:

•BCM Programming

— Configure the system DN length to match the DN length used in the rest of the private

network.

— Program the private Route: Type=Private, Dial=None.

— Program the public Route: Type=Public, Dial=None.

— Enable the MCDN Supplementary Services; TRO=selected, ICCL=selected,

TAT= selected.

— Program telephones with a target line that specifies the system DN of the telephone in the

Private received number field.

• Meridian 1 Programming

— Program the system PNI and the PNIs for the routes.

— Program the Meridian voice mailboxes (if required).

— Enable the MCDN Supplementary Services: RCAP=[ND2,TRO,MWI], NASA=YES.

Set up the specific programming the system requires for the dialing plan. Refer to the following

tables.

Note: If you have public DNs set up for your telephones that are

different from the system-assigned DN, each telephone needs to use the

public and private received digits on the target line.

1 2 ... 298 299 300 301 302 303 304 305 306 307 308 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM50 Konfigurationsanleitung Seite 303

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya BCM50