Avaya BCM50 Konfigurationsanleitung PDF herunterladen (Seite 516)

100

101

516 Chapter 70 Dial Up Interfaces panel

NN40020-603NN40020-603

User <read-only> Displays the user that is currently dialed in.

Local IP Address <read-only> The local IP address assigned to the dial-in connection.

Remote IP Address <read-only> The remote IP address of the dial-in connection.

Callback <read-only> Displays if callback is enabled for this dial-in connection.

Status <read-only> The status of the dial-in connection.

Callback Settings

Callback retries <1-10> The number of attempts made by the BCM to dial-out to the

remote end during callback.

Default: 3

Callback retry

interval (s)

<0-360> Interval for successive connection attempts for dial-out during

callback.

Default: 60 seconds

PPP Configuration. These parameters are passed to PPP stack to manage the PPP connection.

Idle timeout <numeric

string>

Idle time after which, PPP will terminate the PPP connection.

Default: 1800 seconds

Maximum Receive Unit <128–1500> The maximum size of the packets that can be received.

Default: 500

Maximum Transmit Unit <128–1500> The maximum size of the packets that can be sent.

Default: 500

Authentication support PAP

CHAP

MSCHAP

MSCHAPv2

Supported PPP authentication

Default: CHAP

Dial-In Settings

Line <numeric

string>

Line number monitored by the modem for incoming calls. A

value of 0 = blank. Range: Min Target Line-Max Target Line

Default: blank

Calling Number <numeric

string>

Analog modem uses this Calling Number (Calling ID – CLID)

to detect an incoming data call.

Number of Rings <1-10> Number of rings before the BCM redirects a call to the

modem. This field applies only when a call is directed to the

line number specified in this section. Otherwise, this value is

ignored and the modem answers 10 seconds after a call is

presented.

Note: The number of rings, for certain market profiles, must be

multiplied by 2 due to double ring cadence. For these profiles,

the maximum number of rings is 5. (5x2=10)

Default: 1

Auto-disable <check box> When selected, the modem is automatically disabled after

use.

Default: disabled

Table 116 Modem Dial-In Parameters fields (Sheet 2 of 3)

Attribute Value Description

1 2 ... 511 512 513 514 515 516 517 518 519 520 521 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM50 Konfigurationsanleitung Seite 516

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya BCM50