Avaya BCM50 Konfigurationsanleitung PDF herunterladen (Seite 483)

100

101

Chapter 66 DHCP Server Settings panel 483

Networking Configuration Guide

Main panel tabs: IP Terminal DHCP Options

The IP Terminal DHCP Options settings must be enabled for the IP Phones to function properly. If

the system does not use IP Phones or if partial DHCP is enabled, this tab does not need to be

configured.

The IP Terminal DHCP Options tab has three subpanels: Primary Terminal Proxy Server, (S1)

Secondary Terminal Proxy Server (S2), and VLAN.

Primary Terminal Proxy Server options

The Primary Terminal Proxy Server settings specify information that is sent with the DHCP lease,

giving additional information to IP telephones.

Secondary Terminal Proxy Server options

The Secondary Terminal Proxy Server settings control a fallback option in the event that an IP

phone is unable to connect with the Primary Terminal Proxy Server. The settings for the

Secondary Terminal Proxy Server are the same as those for the Primary Terminal Proxy Server.

VLAN options

If you are using a router that supports VLAN, you can configure the BCM as a VLAN member by

entering a VLAN string into this field. This identifier is sent out to all IP terminals along with their

DHCP information.

WINS node

type

<drop-down menu> The type of WINS node:

• B-node: The BCM first checks the HMHOSTS cache, then

uses broadcast for name registration and resolution.

• P-node: The BCM registers with a NetBIOS Name server

at startup.

• M-node: Mixes B- and P-node. The BCM uses the B-node

method, and if that fails, uses the P-node method.

• H-node: Uses both B- and P-node methods. B-node is

used only as a last resort.

Default: H-node

Default

gateway

<IP Address, format

10.10.10.10>

The gateway through which DHCP clients connect to an

external network. Generally, this is the IP address of the BCM

router.

Lease time(s) <numeric string> The amount of time before a DHCP lease expires and the

device must request a new IP address.

Default: 604800 seconds

Table 104 General Settings (Sheet 2 of 2)

Attribute Value Description

1 2 ... 478 479 480 481 482 483 484 485 486 487 488 ... 567 568

Kommentare zu diesen Handbüchern

Keine Kommentare

Avaya BCM50 Konfigurationsanleitung Seite 483

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Avaya BCM50